Hello all. My friend has a Magnifica Evo Latte ECAM 290 84 SB which was leaking from a seal in the upper brew piston assembly which he chose to replace entirely.
When installing he could not locate where to re-attach the drain hose.
In my Magnifica experience it attaches to a “spigot” type fitting at the top of the expansion chamber. But he assures me he does not have a “spigot”
He seems to think the tube fits into a guide that places it above the grounds tray. Which would be quite a change in waste water removal design. The parts diagram and spares listing states the tube as same length as previous models.
I checked the Delonghi parts website diagram and it clearly shows it connects as expected. He is not near me and I have not had my hands on an Evo.
Have any of you heard or know about this possible model variation? Any information appreciated.
When installing he could not locate where to re-attach the drain hose.
In my Magnifica experience it attaches to a “spigot” type fitting at the top of the expansion chamber. But he assures me he does not have a “spigot”
He seems to think the tube fits into a guide that places it above the grounds tray. Which would be quite a change in waste water removal design. The parts diagram and spares listing states the tube as same length as previous models.
I checked the Delonghi parts website diagram and it clearly shows it connects as expected. He is not near me and I have not had my hands on an Evo.
Have any of you heard or know about this possible model variation? Any information appreciated.