Suchergebnisse

The coffeemaker was alive unfortunately one week ago it has started a new failure. The water pump is not pumping water, it functions but it is not so loud as before. I disassembled the pump and it is functioning, the sound is normal too, so louder then inside the machine and i got the needed water quantity. If i assemble it back, then only a little water comes out, and the pump is not noisy, it is not loud, gives out only a little sound ang gives also a little water when it wash the brewing unit…

Jackpot... i found the solution. [img]https://img.conrad.hu/medias/global/ce/5000_5999/5300/5340/5342/534276_BB_00_FB.EPS.jpg[/img] Thermal fuse 206 °C 15 A 230 Vac Cheap and i can replace it into my 3-way one and then it will be look like the original one Here is the datasheet of the fuse:Data Sheet

Zitat von Kaffeechris: „Hello, welcome here to this Kaffee-Welt Portal. You need an new Heater or anyone of this Side have an defekt Heater and the Thermostate is ok. This Heater sell with 45,70€ without tracking. Komtra or BND in Germany, well in the Bay you should look. Best Regards Chris “ Hello, thank you. I think i will dig deeper, if i have luck, then i can find a similar Thermostate, if not then i will buy a new heater As i post in my first post, i found a similar one, and there is one th…

Update, i removed the thermostat module from the Boiler, and now i have the answer to my question... [img]http://kepkezelo.com/images/88s04132etn19clohbky.jpg[/img] I'm looking for a 206 °C module, because only that one is not 0 Ohm / continuity. Where can i find a thermostat like this one?

Hello. As i see this should be a Ceramic heat switch. If the Boiler temp is reaching a temperature this switch is releasing, and there will be no continuity and the Boiler temp is decreasing. I think this will be the failure part. Now i just need the parameters... what should i try, buy ect. I found this one, it is almoast the same but only one not a 3 way or 3in1 model. intercontrol.de/fileadmin/page…urregler/en/161471_en.pdf

Hallo, mene deutsch ist nich so gut so ich schreibe es in Englis. Schuldigung für alle. So, i have a Bosch VeroBar Professiona 100 coffe machine and i have some issue whit it, it's not matter what i chose from the menu (coffee, latte, hot water, hot steam) the machine is making all of the drink but all the drinks are cold as the water in the tank is. I have measured the heater unit, the heater is ok (There is continuity between the ends), i think the trouble is with the 6 polarity cable connecto…